Skip to main content

Control module for dry coolers and air-cooled condensers
AEROCONNECT 1B

AeroCONNECT 1B is a control module for dry coolers and air-cooled condensers.

One model available

Control module for dry coolers and air-cooled condensers

  • Main board
  • Backlit LCD, status LEDs
  • Pressure sensor and/or temperature sensor depending on the application
  • CPU board and CIAT-defined software
  • Ergonomic keypad
  • Multilingual
  • Unit configuration
  • Reading of unit states
  • Monitoring of chilled-water or hot-water temperatures
  • Two setpoint values
  • Control
  • Control of the unit's devices (fans, associated free-cooling valves etc.)
  • Control of the AEROFRESH misting function
  • Control of compressor stages or electrical auxiliary
  • Optimization of the stages for improved efficiency
  • Control of safety devices
  • Operating status and fault LEDs, fault history
  • Communication with CONNECT2 and XTRACONNECT2 controllers fitted to CIAT heat pumps and chillers
  • Optimisation of Aero and heat pump/chiller system operation
  • ModBus-JBus protocol on RS-485 & ethernet as standard
  • LonWorks and BacNet (IP or MSTP) protocol optional
  • Backlit LCD
  • User-friendly, trouble-free operation, easy-to-read screen
  • Two programmable setpoints
  • Troubleshooting
  • Many self-regulating functions
  • Continuous monitoring of operating settings
  • Balancing operating times
  • Self-adjusting control of safety components
  • Many remote-control options
  • Communication interfaces, RS-485 output, open BMS communications protocol (standard- ModBus and BacNet optional)

One model available

Control module for dry coolers and air-cooled condensers

  • Main board
  • Backlit LCD, status LEDs
  • Pressure sensor and/or temperature sensor depending on the application
  • CPU board and CIAT-defined software
  • Ergonomic keypad
  • Multilingual
  • Unit configuration
  • Reading of unit states
  • Monitoring of chilled-water or hot-water temperatures
  • Two setpoint values
  • Control
  • Control of the unit's devices (fans, associated free-cooling valves etc.)
  • Control of the AEROFRESH misting function
  • Control of compressor stages or electrical auxiliary
  • Optimization of the stages for improved efficiency
  • Control of safety devices
  • Operating status and fault LEDs, fault history
  • Communication with CONNECT2 and XTRACONNECT2 controllers fitted to CIAT heat pumps and chillers
  • Optimisation of Aero and heat pump/chiller system operation
  • ModBus-JBus protocol on RS-485 & ethernet as standard
  • LonWorks and BacNet (IP or MSTP) protocol optional
  • Backlit LCD
  • User-friendly, trouble-free operation, easy-to-read screen
  • Two programmable setpoints
  • Troubleshooting
  • Many self-regulating functions
  • Continuous monitoring of operating settings
  • Balancing operating times
  • Self-adjusting control of safety components
  • Many remote-control options
  • Communication interfaces, RS-485 output, open BMS communications protocol (standard- ModBus and BacNet optional)
Documents

Commercial brochure

Controls manual

Kit / option manual