Skip to main content

Axial air heaters
HELIOTHERME® 4000

Heliotherm® is the simple and economical heating or cooling solution for all your applications: for your tertiary use premises (sales area, gymnasium, multi-purpose hall, etc.) or industrial premises (workshop, garage, storage hall, logistics platform, etc.).

The best solution for heating and/or cooling large volumes
Excellent diffusion via patented JET+ double deflection technology
High energy efficiency motor version


picto-hee-white
  • AC fan motor assembly:
    • 5 sizes in heating mode
    • 4 sizes in cooling mode
  • HEE fan motor assembly:
    • 6 sizes in heating and cooling modes

HELIOTHERME® 4000 is designed for all types of small or large areas (industrial premises or workshops, warehouses, large stores, garages, gymnasiums, multi-purpose halls …).
This air heater can be used for overall or back-up heating, either permanently or intermittently, or used simply to keep buildings frost-free.

In wall-mounted or ceiling-mounted versions, the HELIOTHERME® is the simple, affordable heating/cooling solution for all your applications: for your premises in the service sector (sales outlets, halls, multi-purpose rooms,etc.) or in industry (workshop, garage, storage unit, logistics platform, etc.).
The HELIOTHERME® range meets APSAD and NFPA recommendations on air speeds along the edges of units.
All are less than 5 m/s at 0.5 m from the diffuser and thus do not interfere with sprinkler systems.
The air heater may be combined with destratifiers (TPL) to promote mixing of the air within the building (Anti-stratification solution).
HELIOTHERME® ATEX version: voluntary type examination certificate LCIE 13 ATEX 1015 X gas environment.
HELIOTHERME® 4631S version: specially designed for logistics platforms (on request and for a minimum of 15 units). Only available as hot water (1 row) with 400 V/3 PH/50 Hz power supply.

Description:
Fan motor assembly with ROTOREX technology available in 3-phase 2-speed version and 1-phase 1 variable speed version (reduced voltage).
Fan motor assembly, HEE technology (with EC motor) available in 1 phase 1 variable speed (0-10 volts signal) Double deflector diffuser with JET+ technology as standard.

Coils:
LP water: 1, 2 or 3 row(s) - copper tube (AC or HEE version)
HP water: 1 row (2 or 3 rows on request) - steel tube (AC version only)
LP/HP Steam: 1 row - copper-nickel tube (AC version only)
Electric: shielded stainless steel resistors inserted directly in the finned block for optimum heat transfer (AC version only)
Galvanized steel casing, precoated with RAL 7035 paint
Condensate drain pan with perforated bottom and quick connection fitting is built in for cooling or reversible applications.Fan motor assembly, HEE technology (with EC motor) available in 1 phase 1 variable speed (0-10 volts signal)
Double deflector diffuser with JET+ technology as standard.

  • Fan motor assembly with ROTOREX technology and streamlined impeller providing the best compromise between air handling efficiency and acoustic comfort.
  • Fan motor assembly, HEE technology (EC motor) to ensure the best compromise between air flow and energy efficiency and acoustic comfort.
  • Double deflector diffuser with JET+ technology as standard. A CIAT innovation based on Bernoulli's principle on fluid dynamics and on the NACA0012 type aeroplane wing profile. Comfort, silence and energy saving are not optional at CIAT...
  • Highly efficient heat exchanger with tapered baffles. With seventy years' experience in the field of coils, CIAT provides the best combination of tube geometry and fin design on the market.
  • Antibacterial condensate drain pan with integrated quick connection fitting for cooling or reversible applications.
  • Wide range of accessories for all site requirements (mounting, filtration, fresh air, mixing etc.)
  • Extensive range of regulation units for all uses (on/off, proportional, electric battery etc.) HEE mono box allowing the proportional air-source and water-source control of both HEE and TPL HEE Heliothermes
  • AC fan motor assembly:
    • 5 sizes in heating mode
    • 4 sizes in cooling mode
  • HEE fan motor assembly:
    • 6 sizes in heating and cooling modes

HELIOTHERME® 4000 is designed for all types of small or large areas (industrial premises or workshops, warehouses, large stores, garages, gymnasiums, multi-purpose halls …).
This air heater can be used for overall or back-up heating, either permanently or intermittently, or used simply to keep buildings frost-free.

In wall-mounted or ceiling-mounted versions, the HELIOTHERME® is the simple, affordable heating/cooling solution for all your applications: for your premises in the service sector (sales outlets, halls, multi-purpose rooms,etc.) or in industry (workshop, garage, storage unit, logistics platform, etc.).
The HELIOTHERME® range meets APSAD and NFPA recommendations on air speeds along the edges of units.
All are less than 5 m/s at 0.5 m from the diffuser and thus do not interfere with sprinkler systems.
The air heater may be combined with destratifiers (TPL) to promote mixing of the air within the building (Anti-stratification solution).
HELIOTHERME® ATEX version: voluntary type examination certificate LCIE 13 ATEX 1015 X gas environment.
HELIOTHERME® 4631S version: specially designed for logistics platforms (on request and for a minimum of 15 units). Only available as hot water (1 row) with 400 V/3 PH/50 Hz power supply.

Description:
Fan motor assembly with ROTOREX technology available in 3-phase 2-speed version and 1-phase 1 variable speed version (reduced voltage).
Fan motor assembly, HEE technology (with EC motor) available in 1 phase 1 variable speed (0-10 volts signal) Double deflector diffuser with JET+ technology as standard.

Coils:
LP water: 1, 2 or 3 row(s) - copper tube (AC or HEE version)
HP water: 1 row (2 or 3 rows on request) - steel tube (AC version only)
LP/HP Steam: 1 row - copper-nickel tube (AC version only)
Electric: shielded stainless steel resistors inserted directly in the finned block for optimum heat transfer (AC version only)
Galvanized steel casing, precoated with RAL 7035 paint
Condensate drain pan with perforated bottom and quick connection fitting is built in for cooling or reversible applications.Fan motor assembly, HEE technology (with EC motor) available in 1 phase 1 variable speed (0-10 volts signal)
Double deflector diffuser with JET+ technology as standard.

  • Fan motor assembly with ROTOREX technology and streamlined impeller providing the best compromise between air handling efficiency and acoustic comfort.
  • Fan motor assembly, HEE technology (EC motor) to ensure the best compromise between air flow and energy efficiency and acoustic comfort.
  • Double deflector diffuser with JET+ technology as standard. A CIAT innovation based on Bernoulli's principle on fluid dynamics and on the NACA0012 type aeroplane wing profile. Comfort, silence and energy saving are not optional at CIAT...
  • Highly efficient heat exchanger with tapered baffles. With seventy years' experience in the field of coils, CIAT provides the best combination of tube geometry and fin design on the market.
  • Antibacterial condensate drain pan with integrated quick connection fitting for cooling or reversible applications.
  • Wide range of accessories for all site requirements (mounting, filtration, fresh air, mixing etc.)
  • Extensive range of regulation units for all uses (on/off, proportional, electric battery etc.) HEE mono box allowing the proportional air-source and water-source control of both HEE and TPL HEE Heliothermes
Documents

Commercial brochure


Works well with