Plug&play dual-flow air handling units with high efficiency and flexible configuration CLIMACIAT® FLOWAY RANGE
Plug&play dual-flow air handling units with high efficiency and flexible configuration
CLIMACIAT® FLOWAY RANGE
CLIMACIAT® Floway is a Plug & Play dual-flow air handling unit. Much more than a ventilation unit thanks to the high flexibility in term of options and configurations. Outstanding performance and enhalced solutions for indoor Air quality.
Air flow rate: 300 to 25 000 m3/h
Energy class A+ across the entire range
Plug & play unit (built-in control) with IP native communication and webserver
Class A+ across entire range
High-efficiency heat recovery unit
High performance plug fan
Ground installation, side connections
- CLIMACIAT® FLOWAY PX: Plate heat eXchanger (6 sizes, 300 - 7 500 m3/h)
- CLIMACIAT® FLOWAY RX: Rotary eXchanger (11 sizes, 300 - 25 000 m3/h)
Standard casing S, with the possibility to have up to 1 coil inside the unit and pre-heater in PX version.
Casing L to extend the scope of applications, with the possibility to have up to 2 coils inside the unit, preheater, mixing box and bag filters in fresh air.
Up to 2 filter stages in fresh air and 1 filter stage in extracted air. And it is always possible to add additional casing for additional coils or additional bag filters.
CLIMACIAT® Floway is a Plug & Play dual-flow air handling unit that draws clean, fresh air indoors with 80% less energy on average than that needed for air conditioning.
Dual-flow air handling unit equipped as standard with:- State-of-the-art, high-efficiency heat recovery unit (efficiency of over 80% at nominal flow rate)
- High-performance plug fan driven by an electronically commutated motor
- Plug & Play: factory-wired and programmed standalone unit with IP native communication and webserver with sipnoctics
- Equipped as standard with high-tech components: EC motor, latest-generation heat recovery unit, built-in control, etc.
- High insulated casing with low thermal losses (T2/TB2 classification)
- Energy manage & measurement
- Low Exhust Air Transfer Ratio
- Purge sector is standar in rotary heat exchanger
- Up to 3 filter stages (including bag filter options), each of them with independent pressure sensor for fouling filter detection
- Mixing box
- Motorized dampers
- Up to 3 coils stages including high cooling capacity and reversible DX coil
- Pre-heater
- Bag filters
- Indoor and outdoor applications
- Humidity control
- Inox frame in fresh air filters
- Constant supply and/or constant return pressure
- Air quality sensors
- Smoke detectors
- ...
- Plug & play with the advance control
- Easy to install
- Easy to control
- IP native communication
- Integrated webserver
- CLIMACIAT® FLOWAY PX: Plate heat eXchanger (6 sizes, 300 - 7 500 m3/h)
- CLIMACIAT® FLOWAY RX: Rotary eXchanger (11 sizes, 300 - 25 000 m3/h)
Standard casing S, with the possibility to have up to 1 coil inside the unit and pre-heater in PX version.
Casing L to extend the scope of applications, with the possibility to have up to 2 coils inside the unit, preheater, mixing box and bag filters in fresh air.
Up to 2 filter stages in fresh air and 1 filter stage in extracted air. And it is always possible to add additional casing for additional coils or additional bag filters.
CLIMACIAT® Floway is a Plug & Play dual-flow air handling unit that draws clean, fresh air indoors with 80% less energy on average than that needed for air conditioning.
Dual-flow air handling unit equipped as standard with:- State-of-the-art, high-efficiency heat recovery unit (efficiency of over 80% at nominal flow rate)
- High-performance plug fan driven by an electronically commutated motor
- Plug & Play: factory-wired and programmed standalone unit with IP native communication and webserver with sipnoctics
- Equipped as standard with high-tech components: EC motor, latest-generation heat recovery unit, built-in control, etc.
- High insulated casing with low thermal losses (T2/TB2 classification)
- Energy manage & measurement
- Low Exhust Air Transfer Ratio
- Purge sector is standar in rotary heat exchanger
- Up to 3 filter stages (including bag filter options), each of them with independent pressure sensor for fouling filter detection
- Mixing box
- Motorized dampers
- Up to 3 coils stages including high cooling capacity and reversible DX coil
- Pre-heater
- Bag filters
- Indoor and outdoor applications
- Humidity control
- Inox frame in fresh air filters
- Constant supply and/or constant return pressure
- Air quality sensors
- Smoke detectors
- ...
- Plug & play with the advance control
- Easy to install
- Easy to control
- IP native communication
- Integrated webserver
Eurovent certified product performance
This product performance complies with the European standards tests, EN 1048, more specifically, under the exact customer-defined operating conditions. The Eurovent certification guarantees the technical performance rating stated on the product.
