Thermostat - V600 V600
Thermostat - V600
V600
The Carrier V600 thermostat is a high-performance, wall-mounted thermostat designed for use with hydraulic fan coil units. It provides precise temperature and humidity control with automatic or manual fan control and a "Green Leaf" mode that optimizes energy savings. It is easy to configure via the IdroConfig™ app and offers several operating modes (Comfort, Economy, and Antifreeze), as well as automatic or manual change-over and a weekly programming. The thermostat offers KNX communication and a lead/lag function for centralized management. Its triac, TOR, and chrono-proportional outputs and fan control options (three speeds, one speed, or 0–10 V) make it a flexible, complete solution.
Features:
- Automatic or manual fan speed control
- Simplified commissioning via the IdroConfigTM application
- Room temperature and humidity control
- Regimes: Comfort, Economy, and Building Frost Protection
- Automatic or manual heating/cooling changeover
- "Green Leaf" energy optimization mode
- Triac control outputs: TOR, chrono-proportional
- Fan outputs: three-speed, one-speed, or 0-10V
- KNX bus communication (S-Mode, LTE-Mode)
- Weekly programming
- Lead/lag function between thermostats
- The KNX power supply: enables communication via the KNX bus. This is essential for activating the lead/lag function between several thermostats in the same installation or for connecting to a BMS.
- The KNX to BACnet gateway: provides an interface between the KNX protocol and the BACnet network, enabling data exchange between thermostats and a BACnet architecture/BMS.
- The change over sensor: is a combined temperature sensor that provides fine control of indoor comfort and improved system responsiveness.
- The surface-mounted box: is designed for easy installation on specific or non-recessed surfaces, offering greater flexibility in renovation or retrofit projects.
Features:
- Automatic or manual fan speed control
- Simplified commissioning via the IdroConfigTM application
- Room temperature and humidity control
- Regimes: Comfort, Economy, and Building Frost Protection
- Automatic or manual heating/cooling changeover
- "Green Leaf" energy optimization mode
- Triac control outputs: TOR, chrono-proportional
- Fan outputs: three-speed, one-speed, or 0-10V
- KNX bus communication (S-Mode, LTE-Mode)
- Weekly programming
- Lead/lag function between thermostats
- The KNX power supply: enables communication via the KNX bus. This is essential for activating the lead/lag function between several thermostats in the same installation or for connecting to a BMS.
- The KNX to BACnet gateway: provides an interface between the KNX protocol and the BACnet network, enabling data exchange between thermostats and a BACnet architecture/BMS.
- The change over sensor: is a combined temperature sensor that provides fine control of indoor comfort and improved system responsiveness.
- The surface-mounted box: is designed for easy installation on specific or non-recessed surfaces, offering greater flexibility in renovation or retrofit projects.
Certified Eu.bac product
The eu.bac Certification Mark assures users the conformity of our products and systems defined in European directives and European standards.
